Temperatures to 375°F
Throughputs of 10 to 100 PPH

This dehumidifying material dryer is designed for the plastics processor who requires a desiccant dryer with true closed loop drying technology and easy to use microprocessor controls. Closed loop drying from the TSD Material Dryer offers greater efficiency and operation.

All TSD Material Dryers include:
   • True closed-loop drying technology
   • Easy-to-use microprocessor controls
   • Permanently lubricated blowers
   • Easy access for maintenance

CHECK OUT THESE BENEFITS OF THE
TSD SERIES MATERIAL DRYER

UNIFORM TEMPERATURE, DEW POINT
The patented indexing desiccant carousel eliminates dew point and temperature spikes. Three desiccant tanks present dry desiccant to the material drying circuit more frequently.

BETTER PARTS WITH LESS ENERGY
TSD Series material dryers use dehumidified air to cool the regenerated desiccant cartridges. This cooling cycle reclaims the residual heat of regeneration, and does not pre-load the desiccant with moist, ambient air like conventional dryers.

SMART, YET SIMPLE CONTROLS
Enter the drying temperature setpoint, and press the RUN button. The microprocessor control does the rest. This self-monitoring control even diagnoses and alerts you to drying problems.

EASY ACCESS, FAST MAINTENANCE
No-tools access makes easy cleaning of regeneration and process filters, as well as the optional aftercooler and volatile trap. Change desiccant tanks or replace maintenance parts in minutes.

STANDARD FEATURES & OPTIONS OF
THE TSD SERIES MATERIAL DRYER

Desiccant Tank. Store desiccant for moisture removal (A).

Electrical Cabinet. Nema 1 type (B).

Desiccant Carousel. Rotates on a need basis to keep desiccant moisture levels adequate (C).

Process Blower. It provides process air CFM. It circulates air through hopper and dryer (D).

Exhaust Port. Exhausts humidified regenerated air to ambient (E).

Instrument. Microprocessor controller allows for total control of dryer (not visible in photo) (F).

Regeneration Blower. Circulates air through regeneration heater and desiccant tank for moisture removal (G).

Process Heater. Provides heat for hopper material (H).

Regeneration Heater. Provides heat for desiccant regeneration (I).

Other TSD material dryer features:

• High efficiency 15, 25, or 50 CFM blower
• Cyclone dual stage cartridge filter removes fines to 1 micron
• Dual bed stainless stel construction with automatic regeneration
• Easily accessed maintenance points
• Electrically controlled valve actuation
• -40°F dew point guaranteed
• Electromechanical with solid state temperature control
• Tubular heaters with incoloy sheath
• Process temperatures to 300°F
• Patented air diffuser technology
• Piano hinged door with silicone gasket on sizes 60 lbs and up
• Brushed stainless steel interior, painted exterior
• 1 years parts and labor warranty
• Nationwide network of service personnel

OPTIONS:
• Floor stand
• Casters for stand

Three installation options for
the TSD Series material dryer:

Option #1: Beside the drying hopper on the throat of a processing machine when installed with the optional hopper/dryer mounting bracket.

Option #2: Mounted on a stationary floor stand beside the processing machine.

Option #3: Mounted on a mobile cart.